Galvanised Gates

Timberlink stocks a large range of quality galvanised gates

7 rail with box ends

We carry the following gate sizes (all metric sizes) 0.9, 1.2, 1.8, 2.4, 3.0, 3.6, 3.9, 4.2 and 4.5m (Approx imperial 3, 4, 6, 8, 10, 12, 13, 14 and 15ft)


Construction

• Top and bottom rails 44.5mm o/d tube
• Intermediate rails 30mm o/d tube
• 1143mm high
• Spring loaded sliding bolt fastening or optional D loop
• 50mm x 50mm SHS Sleeved hanging stile


5 rail box end half meshed

A quality field gate ideally suited for containing small animals and young stock. It has a sleeved box section hanging stile, 44.5mm o/d. top and bottom rails, 30mm o/d. intermediates and clad with 75 x 75mm weldmesh. 1143mm high.


5 rail cattleyard

A strong gate suitable for use in open cattleyards. It is supplied as standard with keyhole/pendulum sliding bolt and sleeved 50 x 50mm hanging stile. Top and bottom rails are 48.3mm o/d. whilst the intermediates are 44.5mm o/d. 1143mm high.


Sheeted gates

A medium weight (any hand) 3 railed sheeted gate, fitted with keyhole/pendulum type sliding bolt, 1270mm high with a 50 x 50mm sleeved box section hanging stile and the remainder 40 x 40mm box section, clad to one face with pre-galvanised sheet.


Gate posts

Most galvanised field gates are hung on timber gate posts either sawn or round.
We also stock galvanised hanging and slamming posts in 85mm o/d tube.

Galvinsed gates, farm gates, metal gates, metal farm gates, field gates, ranch gates - Timberlink.co.uk - market drayton, shropshire
7 rail box end galvanised gate 5 rail box end half meshed galvanised gate 5 rail cattleyard galvanised gate sheeted galvanised gate